In the summer time, the heat of the sun forces its way indoors. Inside industrial premises, especially in warehouses and workshops, which are not equipped with air conditioning, employees are exposed to excess heat. The temperature prevailing inside the premises is usually higher than that outdoor t...
Interested in this product? Contact us:

Arvydas Palivonas

LT, RU, EN
+370 601 74426

Sales representative for Vilnius, Ukmergė, Utena, Kaišiadorys and Varėna regions Get Offer

Andrius Lekarevičius

LT, RU, EN
+370 606 11865

Sales representative for Kaunas, Panevėžys, Šiauliai, Telšiai, Klaipėda, Tauragė, Marijampolė and Alytus districts Get Offer
Click on the Model for technical data, dimensions, accessories
ColdAir Comfort - for large space cooling, works on the principle of water evaporation
FPA 109 15 kW cooling output, high air flow 10000 m³/h, axial fan, for wall or window mounting - side discharge, mounting bracket included, 2 year WARRANTY
FPA 109
15 kW cooling output, high air flow 10000 m³/h, axial fan, for wall or window mounting - side discharge, mounting bracket included, 2 year WARRANTY
FPA 159 19 kW cooling output, high air flow 13000 m³/h, axial fan, for wall or window mounting - side discharge, mounting bracket included, 2 year WARRANTY
FPA 159
19 kW cooling output, high air flow 13000 m³/h, axial fan, for wall or window mounting - side discharge, mounting bracket included, 2 year WARRANTY
TA 209-SD 30 kW cooling output, high air flow 20000 m³/h, axial fan, for wall or window mounting - side discharge, 2 year WARRANTY
TA 209-SD
30 kW cooling output, high air flow 20000 m³/h, axial fan, for wall or window mounting - side discharge, 2 year WARRANTY
TA 159 19 kW cooling output, high air flow 13000 m³/h, axial fan, for roof mounting - down discharge, 2 year WARRANTY
TA 159
19 kW cooling output, high air flow 13000 m³/h, axial fan, for roof mounting - down discharge, 2 year WARRANTY
TA 209 30 kW cooling output, high air flow 20000 m³/h, axial fan, for roof mounting - down discharge, 2 year WARRANTY
TA 209
30 kW cooling output, high air flow 20000 m³/h, axial fan, for roof mounting - down discharge, 2 year WARRANTY
TA 309 30 kW cooling output, high air flow 27000 m³/h, axial fan, for roof mounting - down discharge, 2 year WARRANTY
TA 309
30 kW cooling output, high air flow 27000 m³/h, axial fan, for roof mounting - down discharge, 2 year WARRANTY
TC 109 15 kW cooling output, high air flow 10000 m³/h, centrifugal fan for ducts system (80 Pa static pressure), for roof mounting - down discharge, 2 year WARRANTY
TC 109
15 kW cooling output, high air flow 10000 m³/h, centrifugal fan for ducts system (80 Pa static pressure), for roof mounting - down discharge, 2 year WARRANTY
TC 209 36 kW cooling output, high air flow 25000 m³/h, centrifugal fan for ducts system (80 Pa static pressure), for roof mounting - down discharge, 2 year WARRANTY
TC 209
36 kW cooling output, high air flow 25000 m³/h, centrifugal fan for ducts system (80 Pa static pressure), for roof mounting - down discharge, 2 year WARRANTY
External air temperature (°C) Relative air humidity
20% 30% 40% 50% 60% 70% 80%
20 11.0 12.0 13.0 14.5 15.5 17.0 18.0
25 14.0 15.5 17.0 18.5 20.0 21.5 22.5
30 17.0 19.0 21.0 23.0 24.5 26.0 27.5
35 20.5 22.5 25.0 27.5 29.5 31.0 32.0

 

Temperature and humidity ratio of a typical hot day

Temperature and air humidity ratio

In the summer time, the heat of the sun forces its way indoors. Inside industrial premises, especially in warehouses and workshops, which are not equipped with air conditioning, employees are exposed to excess heat. The temperature prevailing inside the premises is usually higher than that outdoor temperature due to the heat emitted from various production machinery, a large number of people working together, lighting equipment and other factors. This leads to reduced productivity, increased number of production mistakes, deteriorating wellbeing of the employees and increasing risk of health disorders.

What is an effective way to cool large and spacious premises with minimum energy used for it? You may use a natural phenomenon – water evaporation. Evaporation is opposite to condensation; it allows cooling down huge amounts of air with the help of water and with low energy consumption.

Conventional air conditioners is not always the best choice for large and spacious premises: because of the large volume of air and the heat produced during the operating process by various electric devices and lighting equipment, air temperature in the premises goes up and may reach 35°C or higher values. Cooling of such air by means of conditioners can be very expensive because of high energy consumption. Conditioners operate on the principle of recirculation – they cool and mix the air taken from within the same room. For large-area premises, it is much more effective to displace hot air to the outside with cooler air. This is the principle of operation of the cooling system ColdAir. Air coolers ColdAir supply fresh, cooled-down air from outdoors into the premises, and force the hot inside air to the outside through open windows and doors. Air coolers ColdAir cool air on the principle of water evaporation: first of all, warm air from the outside passes through wet filters Evaporative filter and gives its thermal energy away which is used to evaporate water. Once cooled down by 5 to 7 degrees, the outdoor air is forced into premises in large amounts by means of flow fans; this way, indoor air is replaced with cooler, fresh outdoor air on a continuous basis.

Practically no energy is used to evaporate water; most energy is consumed by the flow fans supplying air. Let’s compare: a cooler ColdAir with the capacity of 13,000 m3/h evaporates 43 l of water and produces 19 kW of cold in an hour by using 1.2 kWh of electric energy (ambient air temperature – 33°C, relative air humidity – 60%); meanwhile, about 5 kWh of electric energy is needed to produce the same amount of cold with a conditioner.

Air coolers ColdAir can be used to cool different types of commercial, industrial, administrative and other premises. This cooling system is especially good for the cases where a large number of heat producing devices are operated inside and where surplus heat needs to be forced out: for example, various furnaces at foundries, metal treatment facilities, a large number of people working together, non-stop lighting, sewing machines, plastic molding machines, etc. Even premises with poor thermal insulation or open spaces can be cooled in an efficient manner with cooling costs remaining at a very low level; furthermore cooling of premises is performed continuously. These coolers are easy to install on a roof, wall or window. They can be used to cool a single common-use premise or different rooms, having installed an air supply system (ductwork). The coolers need minimum maintenance, and their service life is very long.

Evaporative air coolers ColdAir demonstrate premium quality and leading the sales in Italy. The coolers are produced by the Italian company IMPRESIND. The company focuses on the quality of its products and uses el. motors, pumps and other elements from European manufacturers only for the air cooling units. The long-lasting experience allows providing a customer, with solutions which no other company can offer.

More and more companies in Lithuania choose ColdAir. These air coolers are becoming more and more popular; they are also recognized as an economic and effective means to cool large and spacious areas!

The advantages of air coolers ColdAir:

  • Made in Italy! A number one in Italy for cooling of large premises at lowest cost; a reliable product of high quality with an extensive service life.
  • Lower costs: if compared to conventional air conditioning systems, the energy consumed by ColdAir is approximately 80% less! The installation, operation and maintenance costs are also low.
  • Intended to cool large and spacious premises – a large flow of air effectively forces heat out of premises. ColdAir cools and ventilates, as well as supplies 100% filtered fresh air.
  • Quality guarantee – European product with technical properties meeting the declared values, CE certified. ColdAir holds the certificates on Legionella bacteria prevention, as required by EU.
  • Environmentally friendly and safe – the system is free of any refrigerants. The ColdAir evaporation system cools air in a fully natural way. The water in the tank is replaced automatically every 4 hours which ensures the prevention of hazardous bacteria such as Legionella.
  • Different installation possibilities: depending on the model, a cooler can be installed on a wall, window or roof.
  • Easy maintenance: the system does not need any special maintenance and, therefore, does not generate any maintenance costs.
  • Extensive application: excellent for industrial and commercial premises, sewing shops, warehouses, sports and conference halls, logistic centers, hangars, workshops, repair depots, factories and other buildings, which require effective cooling and fresh air supply.

4 way diffuser

ColdAir solution

ColdAIR FPA/TA/TC evaporative coolers
Manuals 6.3 MB
Declarations of conformity 565 KB
Brochures 295 KB
ColdAIR evaporative coolers use and maintenance instructions 4.3 MB
Legionella bacteria certificate of analysis 288 KB
MAC600.008 router wiring scheme 75 KB