|ELiS G-W - industrial, horizontal and vertical mounting, copper heat exchanger with aluminum plates|
Industrial air curtains ELiS G are especially powerful: they provide for a strong flow of air and, thereby, form an effective air barrier blocking ingress of outdoor air, smog, insects and dust into the premises, as well as preventing draughts. These powerful air curtains are intended for use in industrial facilities: they can be mounted horizontally over large entry gates (at the height of as many as 7 m) or vertically – along the side of an entry gate. For installation on both sides, the maximum width of an entry gate can reach 13 m. The design of the air curtains ELiS G allows connecting individual modules one to another to form an air barrier of required length. An unlimited number of modules can be connected both horizontally and vertically.
Principle of operation: the air from the intake is preheated by a water heat exchanger, then, axial-flow fans blow it out at a high speed through air-directional vanes (adjustable at ± 10° intervals). The flow fans have IP54 protection class – they are protected against dust and water splashes. The casing of industrial air curtains ELiS G is made from galvanized, corrosion-resistant, heavy duty steel. To stop the circulation of water, a servo valve could be installed. The operation of an air curtain can be controlled with the help of a magnetic door contact or thermostatic control valve.
Additional options for ordering ELiS G:
The advantages of a industrial air curtain with hot water heat exchanger ELiS G: